Diagnosis Procedure

1. INSPECTION START
   1. Turn ignition switch ON.
   2. Erase DTC.
   3. Perform DTC Confirmation Procedure.

      See "DTC CONFIRMATION PROCEDURE ".

   4. Check DTC.
   5. Is DTC P0607 displayed again?

   Yes or No 

   Yes: GO TO 2.

   No: INSPECTION END 

2. REPLACE ECM

1. Replace ECM.
2. Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs. Refer to "ECM RE-COMMUNICATING FUNCTION ".
3. Perform "VIN REGISTRATION ".
4. Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".
5. Perform "THROTTLE VALVE CLOSED POSITION LEARNING ".
6. Perform "IDLE AIR VOLUME LEARNING ".

INSPECTION END