CONSULT-III Function (BCM): Notes
WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.
CONSULT-III FUNCTION (BCM)
| BCM diagnostic test item | Check item, diagnostic test mode | Content |
|---|---|---|
| Inspection by part | WORK SUPPORT | Changes setting of each function. |
| SELF- DIAG RESULTS | BCM performs self-diagnosis of CAN communication. | |
| DATA MONITOR | Displays the input data of BCM in real time. | |
| CAN DIAG SUPPORT MNTR | The result of transmit/receive diagnosis of CAN communication can be read. | |
| ACTIVE TEST | Gives a drive signal to a load to check the operation. | |
| ECU PART NUMBER | BCM part number can be read. |