LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2010 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 185 (Engine Control System - System And Component Testing) >> Fuel Injector >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different car, the 2010 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUEL INJECTOR
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as per the following.
      TERMINAL RESISTANCE CHART

      Terminals Resistance
      1 and 2 11.1 - 14.3 Ω [at 10 - 60°C (50 - 140°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace malfunctioning fuel injector.

      Fig 1: Checking Resistance Between Fuel Injector Terminals
      G04875480Courtesy of NISSAN MOTOR CO., U.S.A.