Procedure For Malfunction A
- Start engine and warm it up to normal operating temperature.
- Maintain the following conditions for at least 10 consecutive seconds.ENGINE SPEED SPECIFICATION
Engine speed More than 2, 000 RPM (A constant rotation is maintained.) Engine coolant temperature More than 70°C (158°F) Selector lever 1st or 2nd position Driving location uphill Driving vehicle uphill
(Increased engine load will help maintain the driving conditions required for this test.) - Maintain the following conditions for at least 20 consecutive seconds.ENGINE SPEED SPECIFICATION
Engine speed Idle Engine coolant temperature More than 70°C (158°F) Selector lever P or N position - Check 1st trip DTC.
- If 1st trip DTC is detected, go to "DIAGNOSIS PROCEDURE ".