DTC Confirmation Procedure
WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE 1
- Press the push-button ignition switch under the following conditions and wait for at least 1 second.
- Selector lever is in the P or N position.
- Do not depress brake pedal.
- Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES: Go to DIAGNOSIS PROCEDURE .
NO: GO TO 2.
- Press the push-button ignition switch under the following conditions and wait for at least 1 second.
- PERFORM DTC CONFIRMATION PROCEDURE 2
- Turn ignition switch ON.
- Turn ignition switch OFF.
- Press driver side door switch and wait for at least 1 second.
- Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES: Go to DIAGNOSIS PROCEDURE .
NO: INSPECTION END