DTC Detection Logic
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
DTC LOGIC REFERENCE CHART
| DTC | CONSULT display description | DTC Detection Condition | Possible causes |
|---|---|---|---|
| B2098 | IGN RELAY ON | The ignition relay ON is detected for 1 second at ignition switch OFF (CPU monitors the status at the contact and excitation coil circuits of the ignition relay inside it) | Ignition relay malfunction |
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn ignition switch ON.
- Check DTC in "Self Diagnostic Result" mode of "IPDM E/R" using CONSULT.
Is DTC detected?
YES: Refer to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END.