Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK ENGINE START FUNCTION
- Verify that DTC except for DTC P1610 is not detected.
If detected, erase DTC after fixing.
- Turn ignition switch OFF.
- Insert Intelligent Key into key slot.
- Turn ignition switch ON and wait 5 seconds.
- Turn ignition switch OFF and wait 5 seconds.
- Repeat steps 4 and 5 twice (a total of 3 times).
- Verify that engine can start.
INSPECTION END
- Verify that DTC except for DTC P1610 is not detected.