LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner System >> DTC/Circuit Diagnosis >> Sliding Sensor >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "SLIDE PULSE" in "Data monitor" mode with CONSULT-III.
    3. Check sliding sensor signal under the following conditions.
      MONITOR ITEM CONDITION

      Monitor item Condition Valve
      SLIDE PULSE Seat sliding Operate (forward) Change (increase)(1)
      Operate (backward) Change (decrease)(1)
      Release No change(1)
      (1) The value at the seat position attained when the battery is connected is considered to be 32768.

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals