Component Inspection
- CHECK ASCD STEERING SWITCH
- Turn ignition switch OFF.
- Disconnect combination switch (spiral cable) harness connector.
- Check resistance between combination switch (spiral cable) harness connector terminals under the following conditions.
RESISTANCE SPECIFICATIONCombination switch (spiral cable) Condition Resistance (Ω) Connector Terminals M303 13 and 16 MAIN switch: Pressed Approx. 0 CANCEL switch: Pressed Approx. 250 SET/COAST switch: Pressed Approx. 660 RESUME/ACCELERATE switch: Pressed Approx. 1, 490 All ASCD steering switches: Released Approx. 3, 980 Is the inspection result normal?
YES: INSPECTION END
NO: Replace ASCD steering switch