April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

CHECK ICC STEERING SWITCH

Turn ignition switch OFF.
Disconnect combination switch (spiral cable) harness connector.
Check resistance between combination switch (spiral cable) harness connector terminals under the following conditions.

RESISTANCE SPECIFICATION

Combination switch		Condition	Resistance (Ω)
Connector	Terminals	Condition	Resistance (Ω)
M303	13 and 16	MAIN switch: Pressed	Approx. 0
		LDP/DCA switch: Pressed	Approx. 270
		CANCEL switch: Pressed	Approx. 620
		DISTANCE switch: Pressed	Approx. 1, 100
		SET/COAST switch: Pressed	Approx. 1, 810
		RESUME/ACCELERATE switch: Pressed	Approx. 2, 990
		All ICC steering switches: Released	Approx. 5, 420

Is the inspection result normal?

YES: INSPECTION END

NO: Replace ICC steering switch