Diagnosis Procedure
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONTINUITY BETWEEN AV CONTROL UNIT AND MICROPHONE CIRCUIT
- Turn ignition switch OFF.
- Disconnect AV control unit connector and microphone connector.
- Check continuity between AV control unit harness connector and microphone harness connector.CONTINUITY REFERENCE CHART
AV control unit Microphone Continuity Connector Terminals Connector Terminals M180 71 R20 2 Existed 72 4 87 1 - Check continuity between AV control unit harness connector and ground.CONTINUITY REFERENCE CHART
AV control unit Ground Continuity Connector Terminals M180 72 Not existed 87 Is the inspection result normal?
YES: GO TO 2.
NO: Repair harness or connector.
- CHECK VOLTAGE MICROPHONE VCC
- Connect AV control unit connector.
- Turn ignition switch ON.
- Check voltage between AV control unit harness connector.VOLTAGE REFERENCE CHART
(+) (-) Voltage (Approx.) AV control unit Ground Connector Terminal M180 72 5.0 V Is the inspection result normal?
YES: GO TO 3.
NO: Replace AV control unit. Refer to "EXPLODED VIEW ".
- CHECK MICROPHONE SIGNAL
- Connect microphone connector.
- Check signal between AV control unit harness connector.SIGNAL REFERENCE CHART
(+) (-) Condition Reference value AV control unit AV control unit Connector Terminal Connector Terminal M180 87 M180 71 Give a voice. Is the inspection result normal?
YES: Replace AV control unit. Refer to "EXPLODED VIEW ".
NO: Replace microphone. Refer to "EXPLODED VIEW ".