Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

CHECK COOLING FAN FUNCTION
With CONSULT
1. Turn ignition switch ON.
2. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT.
3. Check that cooling fan operates at each speed.
  NOTE: Refer to "COOLING FAN CONTROL : SYSTEM DESCRIPTION ".
Without CONSULT
1. Perform IPDM E/R auto active test and check cooling fan motors operation, refer to , "DIAGNOSIS DESCRIPTION ".
2. Check that cooling fan operates at each speed.
  NOTE: Refer to "COOLING FAN CONTROL : SYSTEM DESCRIPTION ".
  
  Is the inspection result normal?
  
  YES: INSPECTION END
  
  NO: Proceed to "DIAGNOSIS PROCEDURE ".