LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Power Window Control System) >> On-Vehicle Repair >> Power Window Main Switch >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power window main switch finisher (2).

    Refer to EXPLODED VIEW and REMOVAL AND INSTALLATION .

  2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screwdriver (A) etc.
    CAUTION: Do not fold the pawl of power window main switch finisher.
    NOTE: The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH & RH).
    Fig 1: Identifying Power Window Main Switch & Finisher
    G05728630Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals