LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Brake Control System-VDC (CROSSCABRIOLET)) >> DTC/Circuit Diagnosis >> Brake Warning Lamp >> Component Function Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. BRAKE WARNING LAMP OPERATION CHECK 1

    Check that the lamp illuminates for approximately 2 seconds after the ignition switch is turned ON.

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

  2. BRAKE WARNING LAMP OPERATION CHECK 2

    Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the parking brake pedal.

    NOTE: Brake warning lamp will turn on in case of parking brake operation (when switch is ON) or of brake fluid level switch operation (when brake fluid is insufficient).

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Check parking brake switch. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals