LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Defogger (CROSSCABRIOLET)) >> System Description >> Diagnosis System (Soft Top Control Unit) >> CONSULT Function >> Self-Diag Result >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
CONSULT DISPLAY DESCRIPTION

CONSULT display Description
ROOF LATCHED LH ON/OFF/NG Input state of roof striker sensor LH is displayed.
ROOF LATCHED RH ON/OFF/NG Input state of roof striker sensor RH is displayed.
F/CENTER LOCK ON/OFF/NG Input state of roof latch lock sensor is displayed.
R/RAIL RAISED LH ON/OFF/NG Input state of roof status sensor LH is displayed.
R/RAIL LOWERED ON/OFF/NG Input state of roof status sensor LH is displayed.
5TH BOW LOWERED ON/OFF/NG Input state of 5th bow status sensor LH is displayed.
5TH BOW RAISED ON/OFF/NG Input state of 5th bow status sensor RH is displayed.
S/LID OPEN LH ON/OFF/NG Input state of storage lid status sensor LH is displayed.
STORAGE LID CLOSE LH ON/OFF/NG Input state of storage lid status sensor LH is displayed.
SWITCHING VALVE 1 ON/OFF/NG Output state to switching valve 1 is displayed.
SWITCHING VALVE 2 ON/OFF/NG Output state to switching valve 2 is displayed.
SWITCHING VALVE 3 ON/OFF/NG Output state to switching valve 3 is displayed.
SWITCHING VALVE 4 ON/OFF/NG Output state to switching valve 4 is displayed.
PUMP OUT (RH) ON/OFF/NG Right rotation output state to hydraulic motor is displayed.
PUMP OUT (LH) ON/OFF/NG Left rotation output state to hydraulic motor is displayed.
OUTSIDE FLAP DEPLOYMENT ON/OFF/NG Input state of outside flap sensor (deployment switch) is displayed.
OUTSIDE FLAP STORAGE ON/OFF/NG Input state of outside flap sensor (storage switch) is displayed.
INSIDE FLAP DEPLOYMENT ON/OFF/NG Input state of inside flap sensor (deployment switch) is displayed.
INSIDE FLAP STORAGE ON/OFF/NG Input state of inside flap sensor (storage switch) is displayed.
S/LID LOCK OPEN SW ON/OFF/NG Input state of storage lid lock assembly (open switch) is displayed.
S/LID LOCK CLOSE SW ON/OFF/NG Input state of storage lid lock assembly (close switch) is displayed.
S/LID LOCK HALF LATCH SW ON/OFF/NG Input state of storage lid lock assembly (half latch switch) is displayed.
STORAGE LID DOOR SWITCH ON/OFF/NG Input state of storage lid lock assembly (storage lid door switch) is displayed.
OUT FLAP MOTOR RELAY 1 ON/OFF/NG Input state of outside flap motor relay 1 is displayed.
OUT FLAP MOTOR RELAY 2 ON/OFF/NG Input state of outside flap motor relay 2 is displayed.
INSIDE FLAP MOTOR RELAY 1 ON/OFF/NG Input state of inside flap motor relay 1 is displayed.
INSIDE FLAP MOTOR RELAY 2 ON/OFF/NG Input state of inside flap motor relay 2 is displayed.
STORAGE LID LOCK RELAY 1 ON/OFF/NG Input state of storage lid lock relay 1 is displayed.
STORAGE LID LOCK RELAY 2 ON/OFF/NG Input state of storage lid lock relay 2 is displayed.
ROOF SW (OPEN) ON/OFF OPEN input state of roof open/close switch is displayed.
ROOF SW (CLOSE) ON/OFF CLOSE input state of roof open/close switch is displayed.
SHIFT R SIGNAL ON/OFF Input state of shift position (R position) is displayed.
TRUNK OPEN REQUEST SIG ON/OFF Input state of trunk open request signal from BCM is displayed.
TRUNK LID OP/CL STATUS OPEN/CLOSE Input state of trunk lid lock assembly (trunk room lamp switch) is displayed.
THER PROTEC PUMP OK/NG Non-operation state of thermo protection (hydraulic pump) is displayed.
THER PROTEC RCU OK/NG Non-operation state of thermo protection (soft top control unit) is displayed.
PWR COND RCU OK/NG Diagnosis result of power supply (soft top control unit) is displayed.
PWR COND P/W OK/NG Diagnosis result of power supply (front power window) is displayed.
PWR COND REAR P/W OK/NG Diagnosis result of power supply (rear power window) is displayed.
LOCAL COMM 1 NG/SLEEP/NG State of serial link 1 is displayed.
LOCAL COMM 2 NG/SLEEP/NG State of serial link 2 is displayed.
REAR DEF OUT OK/NG Output state to rear window defogger is displayed.
TONNEAU BOARD SWITCH ON/OFF Input state of tonneau board switch is displayed.
P/W OP REQ SW SIG ON/OFF Input state of power window open signal from request switch is displayed.
PROHIBIT P/W UP ON/OFF Output state to power window operation prohibition signal is displayed.
IGN ON SIG (BCM) ON/OFF Receiving state of ignition ON signal from BCM is displayed.
RF OP REQ SW SIG ON/OFF Input state of soft top open signal from request switch is displayed.