System Description
IPDM E/R activates the internal control circuit to perform the relay ON-OFF control according to the input signals from various sensors and the request signals received from control units via CAN communication.
CAUTION:
IPDM E/R integrated relays cannot be removed.
CONTROL RELAY REFERENCE
| Control relay | Input/output | Transmit unit | Control part | Reference | ||||
|---|---|---|---|---|---|---|---|---|
|
|
BCM (CAN) |
|
|
||||
| Front fog lamp relay | Front fog light request signal | BCM (CAN) | Front fog lamp |
|
||||
| Tail lamp relay | Position light request signal | BCM (CAN) |
|
|
||||
| Illuminations | ILLUMINATION CONTROL SYSTEM | |||||||
|
Front wiper request signal | BCM (CAN) | Front wiper | SYSTEM DESCRIPTION | ||||
| Front wiper stop position signal | Front wiper motor | |||||||
|
|
BCM (CAN) |
|
VEHICLE SECURITY SYSTEM | ||||
|
Starter control relay signal | BCM (CAN) | Starter motor | B210D STARTER RELAY , B210B STARTER CONTROL RELAY | ||||
| Steering lock unit condition signal | Steering lock unit | |||||||
| Starter relay control signal | TCM | |||||||
| Steering lock relay(1) | Steering lock relay signal | BCM (CAN) | Steering lock unit(1) | B2108 STEERING LOCK RELAY | ||||
| Steering lock unit condition signal | Steering lock unit | |||||||
| A/T shift selector (Detention switch) signal | A/T shift selector (Detention switch) | |||||||
| A/C relay | A/C compressor request signal | ECM (CAN) | A/C compressor (magnet clutch) | MAGNET CLUTCH CONTROL SYSTEM | ||||
| Ignition relay | Ignition switch ON signal | BCM (CAN) | Ignition relay | B2098 IGNITION RELAY ON STUCK | ||||
| Vehicle speed signal | Unified meter and A/C amp. (CAN) | |||||||
| Push-button ignition switch signal | Push-button ignition switch | |||||||
|
||||||||