LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Power Control System (CROSSCABRIOLET)) >> Power Distribution System >> DTC/Circuit Diagnosis >> DTC B2615: Blower Relay Circuit >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK BLOWER RELAY
    1. Turn ignition switch OFF.
    2. Remove blower relay.
    3. Check the continuity between blower relay terminals.
      CONTINUITY REFERENCE CHART

      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace blower relay.

      Fig 1: Identifying Blow Relay Terminals
      G04889520Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals