Component Inspection

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PUSH-BUTTON IGNITION SWITCH

Turn ignition switch OFF.
Disconnect push-button ignition switch connector.

Measure continuity between push-button ignition switch terminals.

CONTINUITY REFERENCE CHART

Push-button ignition switch		Condition	Continuity
Terminals		Condition	Continuity
1	4	Pressed	Existed
1	4	Not pressed	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace push-button ignition switch. Refer to "REMOVAL AND INSTALLATION ".