April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Detection Logic

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If DTC B2601 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to , "DTC LOGIC ".
If DTC B2601 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to , "DTC LOGIC ".

DTC DETECTING CONDITION AND POSSIBLE CAUSES

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B2601	SHIFT POSITION	BCM detects a difference between the P position signal from CVT sift selector (detention switch) and the P position signal from IPDM E/R (CAN) for 2 seconds or more	Harness or connectors (The CAN communication line is open or shorted.) Harness or connectors [CVT shift selector (detention switch) circuit is open or shorted.] CVT shift selector (detention switch)