DTC Detection Logic

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to , "DTC LOGIC ".
If DTC B260F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to , "DTC LOGIC ".

DTC DETECTING CONDITION AND POSSIBLE CAUSES

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B260F	ENG STATE SIG LOST	BCM is not yet received the engine status signal from ECM when ignition switch is in ON position	Harness or connectors (The CAN communication line is open or shorted.) ECM