DTC Detection Logic
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If DTC B261A is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
, "DTC LOGIC
".
- If DTC B261A is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
, "DTC LOGIC
".
DTC DETECTING CONDITION AND POSSIBLE CAUSES
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B261A |
PUSH-BTN IGN SW |
BCM detects the mismatch between the following for 1 second or more
- Power supply position with push-button ignition switch
- Power supply position from IPDM E/R (CAN)
|
- Harness or connectors (The CAN communication line is open or shorted.)
- Harness or connectors (Push-button ignition switch circuit is open or shorted.)
- Between BCM and push-button ignition switch
- Between IPDM E/R and push-button ignition switch
|