LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> EX35 Journey, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Security Control System (CROSSCABRIOLET)) >> System Description >> Diagnosis System (BCM) >> Intelligent Key >> INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) >> Data Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
MONITOR ITEMS CONDITION CHART

Monitor Item Condition
REQ SW-DR Indicates [ON/OFF] condition of door request switch (driver side)
REQ SW-AS Indicates [ON/OFF] condition of door request switch (passenger side)
REQ SW-RR
NOTE: This item is displayed, but cannot be monitored
REQ SW-RL
NOTE: This item is displayed, but cannot be monitored
REQ SW-BD/TR Indicates [ON/OFF] condition of trunk lid opener request switch
PUSH SW Indicates [ON/OFF] condition of push-button ignition switch
IGN RLY2-F/B Indicates [ON/OFF] condition of ignition relay 2
ACC RLY-FB
NOTE: This item is displayed, but cannot be monitored.
CLUCH SW
NOTE: This item is displayed, but cannot be monitored
BRAKE SW 1 Indicates [ON/OFF](1) condition of brake switch power supply
BRAKE SW 2 Indicates [ON/OFF] condition of brake switch
DETE/CANCL SW Indicates [ON/OFF] condition of P position
SFT PN/N SW Indicates [ON/OFF] condition of P or N position
S/L-LOCK
NOTE: This item is displayed, but cannot be monitored
S/L-UNLOCK
NOTE: This item is displayed, but cannot be monitored
S/L RELAY-F/B
NOTE: This item is displayed, but cannot be monitored
UNLK SEN-DR Indicates [ON/OFF] condition of driver door unlock status
PUSH SW-IPDM Indicates [ON/OFF] condition of push-button ignition switch
IGN RLY1-F/B Indicates [ON/OFF] condition of ignition relay 1
DETE SW-IPDM Indicates [ON/OFF] condition of P position
SFT PN-IPDM Indicates [ON/OFF] condition of P or N position
SFT P-MET Indicates [ON/OFF] condition of P position
SFT N-MET Indicates [ON/OFF] condition of N position
ENGINE STATE Indicates [STOP/START/CRANK/RUN] condition of engine states
S/L LOCK-IPDM
NOTE: This item is displayed, but cannot be monitored
S/L UNLK-IPDM
NOTE: This item is displayed, but cannot be monitored
S/L RELAY-REQ
NOTE: This item is displayed, but cannot be monitored
VEH SPEED 1 Display the vehicle speed signal received from combination meter by numerical value [Km/h]
VEH SPEED 2 Display the vehicle speed signal received from ABS or VDC or CVT by numerical value [Km/h]
DOOR STAT-DR Indicates [LOCK/READY/UNLOCK] condition of driver side door status
DOOR STAT-AS Indicates [LOCK/READY/UNLOCK] condition of passenger side door status
ID OK FLAG Indicates [SET/RESET] condition of key ID
PRMT ENG STRT Indicates [SET/RESET] condition of engine start possibility
PRMT RKE STRT
NOTE: This item is displayed, but cannot be monitored
KEY SW-SLOT Indicates [ON/OFF] condition of key slot
TRNK/HAT MNTR Indicates [ON/OFF] condition of trunk room lamp switch
RKE-LOCK Indicates [ON/OFF] condition of door lock signal from Intelligent Key
RKE-UNLOCK Indicates [ON/OFF] condition of door unlock signal from Intelligent Key
RKE-TR/BD Indicates [ON/OFF] condition of trunk open signal from Intelligent Key
RKE-PANIC Indicates [ON/OFF] condition of panic alarm button of Intelligent Key
RKE-P/W OPEN Indicates [ON/OFF] condition of P/W DOWN signal from Intelligent Key
RKE-MODE CHG Indicates [ON/OFF] condition of MODE CHANGE signal from Intelligent Key
RKE OPE COUN1 When remote keyless entry receiver (front side) receives the signal transmitted while operating on Intelligent Key, the numerical value start changing.
RKE OPE COUN2 When remote keyless entry receiver (rear side) receives the signal transmitted while operating on Intelligent Key, the numerical value start changing.
(1) OFF is displayed when brake pedal is depressed while brake switch power supply is OFF.