LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> FX35 AWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 134 (Engine Control System - Introduction) >> System Description >> Diagnosis System (ECM) >> Diagnosis Description >> On Board Diagnosis Function >> SRT Status Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SRT Status Mode

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

Description

This function allows to read if ECM has completed the self-diagnoses of major emission control systems and components. For SRT, refer to "DIAGNOSIS DESCRIPTION : SYSTEM READINESS TEST (SRT) CODE ".

Operation Procedure

  1. Turn ignition switch ON and wait 20 seconds.
  2. SRT status is indicated as shown blow.
    • ECM continues to illuminate MIL if all SRT codes are set.
    • ECM blinks MIL for about 10 seconds if all SRT codes are not set.
    Fig 1: Identifying Blinking Pattern Of Ignition Switch
    G07164974Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals