LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (LAN System) >> Can Fundamental >> Main Line Between M&A And Abs Circuit >> Main Line Between ADP And BSW Circuit >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK HARNESS CONTINUITY (OPEN CIRCUIT)
    1. Turn the ignition switch OFF.
    2. Disconnect the battery cable from the negative terminal.
    3. Disconnect the following harness connectors.
      • ECM
      • Harness connectors B460 and B11
      • BSW control module
    4. Check the continuity between the harness connector and the BSW control module harness connector.
    CONTINUITY SPECIFICATION

    Harness connector BSW control module harness connector Continuity
    Connector No. Terminal No. Connector No. Terminal No.
    B11 3 B50 14 Existed
    19 15 Existed

    Is the inspection result normal? 

    YES (Present error): Check CAN system type decision again.

    YES (Past error): Error was detected in the main line between the driver seat control unit and the BSW control module.

    NO: Repair the main line between the harness connector B11 and the BSW control module.

scientia non olet · About LEMON Manuals