Common Specifications & Procedures
FX35 & FX50 COMMON SPECIFICATIONS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SERVICE DATA AND SPECIFICATIONS (SDS) for FX35 or SERVICE DATA AND SPECIFICATIONS (SDS) for FX50 | ||
| Torque | See Torque Specifications in text and applicable figures under REMOVAL AND INSTALLATION for FX35 or REMOVAL AND INSTALLATION for FX50. | ||
| Axle Nut/Hub Nut | |||
| Front Axle Nut | 125 N.m (92 ft. lbs.) | ||
| Front Hub Bearing Bolts | 88.3 N.m (65 ft. lbs.) | ||
| Rear Axle Nut | 100-105 N.m (10-11 kg-m, 74-77 ft-lb) | ||
| Battery | |||
| FX35 & FX50 | BATTERY . | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | |||
| Front | FRONT DISC BRAKE | ||
| Rear | REAR DISC BRAKE | ||
| Torque | |||
| Front Disc Brake | See Torque Specifications in text and applicable figures under FRONT DISC BRAKE . | ||
| Rear Disc Brakes | See Torque Specifications in text and applicable figures under REAR DISC BRAKE . | ||
| Charging | |||
| Alternator | ALTERNATOR | ||
| Torque | |||
| FX35 | See Torque Specifications in text and applicable figures under VQ35HR . | ||
| FX50 | See Torque Specifications in text and applicable figures under VK50VE . | ||
| Drive Belts | |||
| Adjustment | |||
| FX35 | Vehicle is equipped with Automatic Belt tensioner. | ||
| FX50 | Vehicle is equipped with Automatic Belt tensioner | ||
| Belt Routing | |||
| FX35 | See appropriate figure under EXPLODED VIEW . | ||
| FX50 | See appropriate figure under EXPLODED VIEW . | ||
| Engine Cooling | |||
| General Service Specifications | |||
| FX35 | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| FX50 | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Radiator Cap Pressure | 98-118 kPa (1.0-1.2 kgf/cm2 , 14-17 psi) | ||
| Thermostat R & I | |||
| FX35 | WATER INLET AND THERMOSTAT ASSEMBLY | ||
| FX50 | WATER INLET AND THERMOSTAT ASSEMBLY | ||
| Water Pump R & I | |||
| FX35 | WATER PUMP | ||
| FX50 | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | |||
| FX35 | COMPRESSION PRESSURE | ||
| FX50 | COMPRESSION PRESSURE | ||
| Oil Pressure (Engine oil temperature at 80°C (176°F)) |
|||
| Idle | 98 kPa (1.0 kgf/cm2 , 14 psi) | ||
| 2000 RPM | 294 kPa (3.0 kgf/cm2 , 43 psi) | ||
| Overhaul | |||
| FX35 | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| FX50 | SERVICE DATA AND SPECIFICATIONS (SDS) | ||
| Torque | |||
| FX35 | See Torque Specifications in text and applicable figures under UNIT DISASSEMBLY AND ASSEMBLY . | ||
| FX50 | See Torque Specifications in text and applicable figures under UNIT DISASSEMBLY AND ASSEMBLY . | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate (Drive Plate) Torque | |||
| FX35 & FX50 | 89 N.m (65 ft. lbs.) | ||
| Fuel System | |||
| Pressure | |||
| FX35 & FX50 | 51 psi (3.6 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | |||
| FX35 | FUEL PRESSURE | ||
| FX50 | FUEL PRESSURE | ||
| Fuel Filter Location | Fuel filter is located on fuel pump unit in fuel tank. | ||
| Ignition | |||
| Firing Order & Cylinder Identification | |||
| FX35 | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| FX50 | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | Vehicle is equipped with Coil-On-Plug ignition. | ||
| Ignition Wires (Routing) | Vehicle is equipped with Coil-On-Plug ignition. | ||
| Spark Plugs | |||
| FX35 | SPARK PLUG Torque: 14 Ft. lbs. (19.6 N.m) |
||
| FX50 | SPARK PLUG Torque: 14 Ft. lbs. (19.6 N.m) |
||
| Starting | |||
| Starter | |||
| FX35 & FX50 | STARTER MOTOR | ||
| Torque | |||
| FX35 & FX50 | See Torque Specifications in text and applicable figures under STARTER MOTOR . | ||
| Wheel Alignment | |||
| Adjustment Specifications | |||
| Front | See WHEEL ALIGNMENT for 2WD or WHEEL ALIGNMENT for AWD. | ||
| Rear | WHEEL ALIGNMENT | ||
| Torque | |||
| Front | See Torque Specifications in text and applicable figures under REMOVAL AND INSTALLATION for 2WD or REMOVAL AND INSTALLATION for AWD. | ||
| Rear | See Torque Specifications in text and applicable figures under REMOVAL AND INSTALLATION . | ||
| Wheel & Tire | |||
| Lug Nut Torque | 108 N.m (11 kg-m, 80 ft-lb) | ||
| How To Use Nissan/Infiniti Service Information | |||
| Includes: Standard Bolt Torque Symbol Identification General Connector Info |
GENERAL INFORMATION -- FX35/FX50 | ||