LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> FX35 RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Engine Control System - Introduction) >> System Description >> Evaporative Emission System >> System Description >> Input/Output Signal Chart >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart: Notes

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
INPUT/OUTPUT SIGNAL REFERENCE

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS) Engine speed(1) & Piston position EVAP canister purge flow control EVAP canister purge volume control solenoid valve
Camshaft position sensor (PHASE)
Mass air flow sensor Amount of intake air
Engine coolant temperature sensor Engine coolant temperature
Battery Battery voltage(1)
Throttle position sensor Throttle position
Accelerator pedal position sensor Accelerator pedal position
Air fuel ratio (A/F) sensor 1 Density of oxygen in exhaust gas (Mixture ratio feedback signal)
Fuel tank temperature sensor Fuel temperature in fuel tank
EVAP control system pressure sensor Pressure in purge line
Unified meter and A/C amp. Vehicle speed(2)
(1) ECM determines the start signal status by the signals of engine speed and battery voltage.
(2) This signal is sent to the ECM through CAN communication line.