Component Inspection (Cooling Fan Relay)

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK COOLING FAN RELAY

Turn ignition switch OFF.
Remove cooling fan relay.
Check the continuity between cooling fan relay terminals under the following conditions.

CONTINUITY SPECIFICATION

Terminals	Conditions	Continuity
3 and 5	12 V direct current supply between terminals 1 and 2	Existed
3 and 5	No current supply	Not existed

Fig 1: Identifying Cooling Fan Relay Connector Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.

Is the inspection result normal?

YES: INSPECTION END

NO: Replace cooling fan relay.