Component Inspection (Condenser)
WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONDENSER
- Turn ignition switch OFF.
- Disconnect condenser harness connector.
- Check resistance between condenser terminals as follows.
RESISTANCE SPECIFICATION
| Terminals |
Resistance |
| 1 and 2 |
Above 1 MΩ [at 25°C (77°F)] |
Is the inspection result normal?
YES: INSPECTION END
NO: Replace condenser.