Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK PUSH-BUTTON IGNITION SWITCH

Turn ignition switch OFF.
Disconnect push-button ignition switch connector.

Check continuity between push-button ignition switch terminals.

CONTINUITY SPECIFICATION

Push-button ignition switch		Condition		Continuity
Terminal		Condition		Continuity
1	4	Push-button ignition switch	Pressed	Existed
1	4	Push-button ignition switch	Not pressed	Not existed

Is the inspection result normal?

YES: INSPECTION END.

NO: Replace push-button ignition switch. Refer to "REMOVAL AND INSTALLATION ".