LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> G25 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine Control System - G37 Convertible - Introduction (1 Of 2)) >> System Description >> Air Conditioning Cut Control >> System Description >> Input/Output Signal Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
INPUT/OUTPUT SIGNAL CHART

Sensor Input Signal to ECM ECM function Actuator
Crankshaft position sensor (POS)
Camshaft position sensor (PHASE)
Engine speed(2) Air conditioner cut control IPDM E/R
โ†“
A/C relay
โ†“
Compressor
Engine coolant temperature sensor Engine coolant temperature
Accelerator pedal position sensor Accelerator pedal position
Battery Battery voltage(2)
Refrigerant pressure sensor Refrigerant pressure
Power steering pressure sensor Power steering operation
Unified meter and A/C amp. Air conditioner ON signal(1)
Vehicle speed(1)
(1) This signal is sent to the ECM via the CAN communication line.
(2) ECM determines the start signal status by the signals of engine speed and battery voltage.