CONSULT-III Function and System Application*1: Function
CONSULT-III/GST FUNCTION CHART
| Mode | Function |
|---|---|
| All DTC Reading | Display all DTCs or diagnostic items that all ECUs are recording and judging. |
| Work Support | This mode enables a technician to adjust some devices faster and more accurately. |
| Self Diagnostic Results | Retrieve DTC from ECU and display diagnostic items. |
| Data Monitor | Monitor the input/output signal of the control unit in real time. |
| CAN Diagnosis | This mode displays a network diagnosis result about CAN by diagram. |
| CAN Diagnosis Support Monitor | It monitors the status of CAN communication. |
| Active Test | Send the drive signal from CONSULT-III to the actuator. The operation check can be performed. |
| DTC & SRT confirmation | The status of system monitoring tests and the self-diagnosis status/result can be confirmed. |
| ECU Identification | Display the ECU identification number (part number etc.) of the selected system. |
| Function Test | This mode can show results of self-diagnosis of ECU with either "OK" or "NG". For engines, more practical tests regarding sensors/switches and/or actuators are available. |
| Configuration | Function to READ/WRITE vehicle configuration. |
| Special Function | Other results or histories, etc. that are recorded in ECU are displayed. |