LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Power Control System -- G37 Convertible) >> IPDM E/R >> Removal And Installation >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery cable from the negative terminal.
  2. Remove the cowl top cover (RH). Refer to "EXPLODED VIEW ".
  3. Pull up the IPDM E/R assembly while pressing the pawls (A) on the back of the IPDM E/R cover B (1).
    Fig 1: Identifying Pawls And IPDM E/R Cover B
    G04889515Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove the IPDM E/R cover A (1). While pressing the pawls (A) at the lower end of the IPDM E/R cover A
  5. Disconnect the harness connector and remove the IPDM E/R (2).
    Fig 2: Identifying IPDM E/R Cover A, Pawls And IPDM E/R
    G04889516Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove the bolts (A) and remove the bracket (1) from the vehicle.
    Fig 3: Identifying Bolts And Bracket
    G05975023Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals