LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Power Control System -- G37 Convertible) >> Power Distribution System >> DTC/Circuit Diagnosis >> DTC B2616: Ignition Relay Circuit >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK IGNITION RELAY
    1. Turn ignition switch OFF.
    2. Remove ignition relay.
    3. Check the continuity between ignition relay terminals.
      TERMINAL CONTINUITY REFERENCE CHART

      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace Ignition relay

      Fig 1: Checking Continuity Between Ignition Relay Terminals
      G04889520Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals