LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Power Control System -- G37 Convertible) >> Power Distribution System >> System Description >> Diagnosis System (BCM) >> Intelligent Key >> INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)

WARNING: This page is about a different car, the 2010 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.

WORK SUPPORT

WORK SUPPORT REFERENCE CHART

Monitor item Description
CONFIRM KEY FOB ID It can be checked whether Intelligent Key ID code is registered or not in this mode
AUTO LOCK SET Auto door lock time can be changed in this mode
  • MODE 1: 1 minute
  • MODE 2: 5 minutes
  • MODE 3: 30 seconds
  • MODE 4: 2 minutes
LOCK/UNLOCK BY I-KEY Door lock/unlock function by door request switch (driver side and passenger side) mode can be changed to operate (ON) or not operate (OFF) in this mode
ENGINE START BY I-KEY Engine start function mode can be changed to operate (ON) or not operate (OFF) with this mode
TRUNK/GLASS HATCH OPEN Buzzer reminder function mode by trunk lid opener request switch can be changed to operate (ON) or not operate (OFF) with this mode
PANIC ALARM SET Panic alarm button pressing time on Intelligent Key remote control button can be selected from the following with this mode
  • MODE 1: 0.5 sec
  • MODE 2: Non-operation
  • MODE 3: 1.5 sec
PW DOWN SET Unlock button pressing time on Intelligent Key button can be selected from the following with this mode
  • MODE 1: 3 sec
  • MODE 2: Non-operation
  • MODE 3: 5 sec
TRUNK OPEN DELAY Trunk button pressing on Intelligent Key button can be selected as per the following in this mode
  • MODE 1: Press and hold
  • MODE 2: Press twice
  • MODE 3: Press and hold, or press twice
LO-BATT OF KEY FOB WARN Intelligent Key low battery warning mode can be changed to operate (ON) or not operate (OFF) with this mode
ANTI KEY LOCK IN FUNCTI Key reminder function mode can be changed to operate (ON) or not operate (OFF) with this mode
HAZARD ANSWER BACK Hazard reminder function mode can be selected from the following with this mode
  • LOCK ONLY: Door lock operation only
  • UNLOCK ONLY: Door unlock operation only
  • LOCK/UNLOCK: Lock/unlock operation
  • OFF: Non-operation
ANS BACK I-KEY LOCK Buzzer reminder function (lock operation) mode by door request switch (driver side and passenger side) can be selected from the following with this mode
  • Horn chirp: Sound horn
  • Buzzer: Sound Intelligent Key warning buzzer
  • OFF: Non-operation
ANS BACK I-KEY UNLOCK Buzzer reminder function (unlock operation) mode by door request switch can be changed to operate (ON) or not operate (OFF) with this mode
SHORT CRANKING OUTPUT Starter motor can operate during the times below
  • 70 msec
  • 100 msec
  • 200 msec
INSIDE ANT DIAGNOSIS This function allows inside key antenna self-diagnosis
HORN WITH KEYLESS LOCK Horn reminder function mode by Intelligent Key button can be changed to operate (ON) or not operate (OFF) with this mode

SELF-DIAG RESULT

Refer to "DTC INDEX ".

DATA MONITOR

DATA MONITOR REFERENCE CHART

Monitor item Condition
REQ SW-DR Indicates [ON/OFF] condition of door request switch (driver side)
REQ SW-AS Indicates [ON/OFF] condition of door request switch (passenger side)
REQ SW-BD/TR Indicates [ON/OFF] condition of trunk lid opener request switch
PUSH SW Indicates [ON/OFF] condition of push-button ignition switch
IGN RLY2-F/B Indicates [ON/OFF] condition of ignition relay 2
ACC RLY-FB
NOTE: This item is displayed, but cannot be monitored
CLUTCH SW(1) Indicates [ON/OFF] condition of clutch switch
BRAKE SW 1 Indicates [ON/OFF](3) condition of brake switch power supply
BRAKE SW 2 Indicates [ON/OFF] condition of brake switch
DETE/CANCL SW(2) Indicates [ON/OFF] condition of P position
SFT PN/N SW(2) Indicates [ON/OFF] condition of P or N position
S/L-LOCK Indicates [ON/OFF] condition of steering lock unit (LOCK)
S/L-UNLOCK Indicates [ON/OFF] condition of steering lock unit (UNLOCK)
S/L RELAY-F/B Indicates [ON/OFF] condition of steering lock relay
UNLK SEN-DR Indicates [ON/OFF] condition of driver door UNLOCK status
PUSH SW-IPDM Indicates [ON/OFF] condition of push-button ignition switch
IGN RLY1-F/B Indicates [ON/OFF] condition of ignition relay 1
DETE SW-IPDM(2) Indicates [ON/OFF] condition of P position
SFT PN-IPDM(2) Indicates [ON/OFF] condition of P or N position
SFT P-MET(2) Indicates [ON/OFF] condition of P position
SFT N-MET(2) Indicates [ON/OFF] condition of N position
ENGINE STATE Indicates [STOP/STALL/CRANK/RUN] condition of engine states
S/L LOCK-IPDM Indicates [ON/OFF] condition of steering lock unit (LOCK)
S/L UNLK-IPDM Indicates [ON/OFF] condition of steering lock unit (UNLOCK)
S/L RELAY-REQ Indicates [ON/OFF] condition of steering lock relay
VEH SPEED 1 Display the vehicle speed signal received from combination meter by numerical value [Km/h]
VEH SPEED 2 Display the vehicle speed signal received from ABS or VDC or TCM by numerical value [Km/h]
DOOR STAT-DR Indicates [LOCK/READY/UNLOCK] condition of driver side door status
DOOR STAT-AS Indicates [LOCK/READY/UNLOCK] condition of passenger side door status
ID OK FLAG Indicates [SET/RESET] condition of key ID
PRMT ENG STRT Indicates [SET/RESET] condition of engine start possibility
PRMT RKE STRT
NOTE: This item is displayed, but cannot be monitored
KEY SW-SLOT Indicates [ON/OFF] condition of key slot
TRNK/HAT MNTR Indicates [ON/OFF] condition of trunk lid
RKE-LOCK Indicates [ON/OFF] condition of LOCK signal from Intelligent Key
RKE-UNLOCK Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key
RKE-TR/BD Indicates [ON/OFF] condition of TRUNK LID OPEN signal from Intelligent Key
RKE-PANIC Indicates [ON/OFF] condition of PANIC button of Intelligent Key
RKE-P/W OPEN Indicates [ON/OFF] condition of P/W DOWN signal from Intelligent Key
RKE-MODE CHG Indicates [ON/OFF] condition of MODE CHANGE signal from Intelligent Key
RKE OPE COUN1 When remote keyless entry receiver receives the signal transmitted while operating on Intelligent Key, the numerical value start changing
RKE OPE COUN2
NOTE: This item is displayed, but cannot be monitored
REVERSE SW(1) Indicates [ON/OFF] condition of R position
(1) It is displayed but does not operate on A/T models.
(2) It is displayed but does not operate on M/T models.
(3) OFF is displayed when brake pedal is depressed while brake switch power supply is OFF.

ACTIVE TEST

ACTIVE TEST REFERENCE CHART

Test item Description
BATTERY SAVER This test is able to check interior room lamp operation
The interior room lamp is activated after "On" on CONSULT-III screen is touched
PW REMOTO DOWN SET This test is able to check power window down operation
The power window down is activated after "On" on CONSULT-III screen is touched
OUTSIDE BUZZER This test is able to check Intelligent Key warning buzzer operation
The Intelligent Key warning buzzer is activated after "On" on CONSULT-III screen is touched
INSIDE BUZZER This test is able to check warning chime in combination meter operation
  • Take away warning chime sounds when "Take out" on CONSULT-III screen is touched
  • Key warning chime sounds when "Key" on CONSULT-III screen is touched
  • OFF position warning chime sounds when "Knob" on CONSULT-III screen is touched
INDICATOR This test is able to check warning lamp operation
  • "KEY" Warning lamp illuminates when "KEY ON" on CONSULT-III screen is touched
  • "KEY" Warning lamp blinks when "KEY IND" on CONSULT-III screen is touched
INT LAMP This test is able to check interior room lamp operation
The interior room lamp is activated after "On" on CONSULT-III screen is touched
LCD This test is able to check meter display information
  • Engine start information displays when "BP N" on CONSULT-III screen is touched
  • Engine start information displays when "BP I" on CONSULT-III screen is touched
  • Key ID warning displays when "ID NG" on CONSULT-III screen is touched
  • Steering lock information displays when "ROTAT" on CONSULT-III screen is touched
  • P position warning displays when "SFT P" on CONSULT-III screen is touched
  • Intelligent Key insert information displays when "INSRT" on CONSULT-III screen is touched
  • Intelligent Key low battery warning displays when "BATT" on CONSULT-III screen is touched
  • Take away through window warning displays when "NO KY" on CONSULT-III screen is touched
  • Take away warning display when "OUTKEY" on CONSULT-III screen is touched
  • OFF position warning display when "LK WN" on CONSULT-III screen is touched
TRUNK/GLASS HATCH This test is able to check trunk lid opener actuator open operation
This actuator opens when "Open" on CONSULT-III screen is touched
FLASHER This test is able to check security hazard lamp operation
The hazard lamps are activated after "LH/RH/Off" on CONSULT-III screen is touched
HORN This test is able to check horn operation
The horn is activated after "On" on CONSULT-III screen is touched
P RANGE This test is able to check control device power supply
Control device power is supplied when "On" on CONSULT-III screen is touched
ENGINE SW ILLUMI This test is able to check push-ignition switch illumination operation
Push-ignition switch illumination illuminates when "On" on CONSULT-III screen is touched
LOCK INDICATOR This test is able to check LOCK indicator in push-ignition switch operation
LOCK indicator in push-ignition switch illuminates when "On" on CONSULT-III screen is touched
ACC INDICATOR This test is able to check ACC indicator in push-ignition switch operation
ACC indicator in push-ignition switch illuminates when "On" on CONSULT-III screen is touched
IGNITION ON IND This test is able to check on indicator in push-ignition switch operation
ON indicator in push-ignition switch illuminates when "On" on CONSULT-III screen is touched
KEY SLOT ILLUMI This test is able to check key slot illumination operation
Key slot illumination blinks when "On" on CONSULT-III screen is touched
TRUNK/BACK DOOR This test is able to check trunk lid opener actuator open operation
This actuator opens when "Open" on CONSULT-III screen is touched
scientia non olet · About LEMON Manuals