Physical Values
WARNING: This page is about a different variant/trim than selected.
PHYSICAL VALUES CHART
| Terminal (Wire color) | Description | Condition | Reference value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | |||
| 6 | - | Shield | - | - | - | - |
| 7 | - | Shield | - | - | - | - |
| 8 (W) | Ground | Camera image signal | Input | Ignition switch ON | At rear view camera image is displayed. | |
| 9 (L) | Ground | Communication signal (DISP→CONT) | Output | Ignition switch ON | When adjusting display brightness. | |
| 10 (P) | Ground | Communication signal (CONT→DISP) | Input | Ignition switch ON | When adjusting display brightness. | |
| 11 (Y) | Ground | Battery power supply | Input | Ignition switch OFF | - | Battery voltage |
| 12 (B) | Ground | Ground | - | Ignition switch ON | - | 0 V |
| 18 (L) | Ground | Composite image signal | Input | Ignition switch ON | At DVD image is displayed. | |
| 19 (P) | Ground | Composite image ground | - | Ignition switch ON | - | 0 V |
| 22 | - | Shield | - | - | - | - |
| 23 (LG) | Ground | ACC power supply | Input | Ignition switch ACC | - | Battery voltage |
| 27 | - | RGB digital image signal (-) | Input | - | - | - |
| 28 | - | RGB digital image signal (+) | Input | - | - | - |