Data Monitor

ALL SIGNALS

• Displays the status of the following vehicle signals inputted into the AV control unit.
• For each signal, actual signal can be compared with the condition recognized on the system.
  VEHICLE SIGNALS REFERENCE CHART
  
  

  Display Item	Display	Vehicle status	Remarks
  VHCL SPD SIG	On	Vehicle speed > 0 km/h (0 MPH)	Changes in indication may be delayed. This is normal.
  	Off	Vehicle speed = 0 km/h (0 MPH)
  PKB SIG	On	Parking brake is applied.
  	Off	Parking brake is released.
  ILLUM SIG	On	Block the light beam from the auto light optical sensor when the light SW is ON.	-
  	Off	Expose the auto light optical sensor to light when the light SW is OFF or ON.
  IGN SIG	On	Ignition switch ON
  	Off	Ignition switch in ACC position
  REV SIG	On	Selector lever in R position	Changes in indication may be delayed. This is normal.
  	Off	Selector lever in any position other than R
  SIDE VIEW SW	Off	-	This item is displayed, but cannot be monitored.
  ROOM LAMP	Off	-	This item is displayed, but cannot be monitored.

SELECTION FROM MENU

Allows the technician to select which vehicle signals should be displayed and displays the status of the selected vehicle signals.