AV CONTROL UNIT : Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.

CHECK FUSE

Check for blown fuses.

FUSES REFERENCE CHART

Power source	Fuse No.
Battery	34
Ignition switch ACC or ON	19

Is the inspection result normal?

YES: Go to 2.

NO: Be sure to eliminate cause of malfunction before installing new fuse.

CHECK POWER SUPPLY CIRCUIT

Check voltage between AV control unit harness connectors and ground.

VOLTAGE REFERENCE CHART

Signal name	Connector No.	Terminal No.	Ignition switch position	Value (Approx.)
Battery power supply	M201	19	OFF	Battery voltage
ACC power supply	M201	7	ACC	Battery voltage

Is the inspection result normal?

YES: Go to 3.

NO: Check harness between AV control unit and fuse.

CHECK GROUND CIRCUIT

Check continuity between AV control unit harness connectors and ground.

CONTINUITY REFERENCE CHART

Signal name	Connector No.	Terminal No.	Ignition switch position	Continuity
Ground	M201	20	OFF	Existed

Is the inspection result normal?

YES: INSPECTION END

NO: Repair harness or connector.