Removal and Installation: Removal
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Before replacing AV control unit, perform "READ CONFIGURATION" to save or print current vehicle specification. For details, refer to "DESCRIPTION ".
- Remove battery terminal and AV control unit after a lapse of 30 seconds or more after turning the ignition switch OFF
NOTE:
After the ignition switch is turned OFF, the AV control unit continues operating for approximately 30 seconds. Therefore, data corruption may occur if battery voltage is cut off within 30 seconds.
- Remove display unit. Refer to "EXPLODED VIEW ".
- Remove AV control unit with a unified meter and A/C amp. as a single unit from the body.
- Remove bracket screws, and then remove AV control unit.