Simple Check for Bluetooth™ Communication

If cellular phone and AV control unit cannot be connected with Bluetooth™ communication, following procedure allows the technician to judge which device has malfunction.

1. Turn on a cellular phone, not connecting Bluetooth™ communication.
2. Start CONSULT-III, then start Windows®.
3. Set CONSULT-III near a cellular phone.
4. When operated Bluetooth™ registration by cellular phone, check if CONSULT-III* would be displayed on the device name.

   (If other Bluetooth™ device is located near cellular phone, a name of the device would be displayed also.)

   NOTE: *:Displayed device name is "NISSAN-********".
   • If no device name is displayed, cellular phone is malfunctioning. Repair the cellular phone first, then perform diagnosis.
   • If CONSULT-III is displayed on device name, cellular phone is normal. Perform diagnosis as per the following table.
     Fig 1: Identifying Hand-Free Phone

     Courtesy of NISSAN MOTOR CO., U.S.A.