Audio Function

The audio system is equipped with the following functions. Each function is operated with multifunction switch, preset switch, steering switch. Operation status of audio is indicated at display.

Operating Signal

Audio system operation can be performed with multifunction switch, preset switch or steering switch.

• Operating signal is transmitted to AV control unit with AV communication when it is operated by multifunction switch or preset switch. The disk ejection operating signal is performed by hardwire.
• Operating signal is transmitted to AV control unit with steering switch signal when it is operated by steering switch.

Screen Display

• Switching of display is performed with serial communication between display unit and AV control unit.
• The image signal to display operating condition is performed with RGB image signal, RGB area signal and RGB image synchronizing signal.

AM/FM Radio Mode

• AM/FM radio tuner is built into AV control unit.
• Audio signal is received by glass antenna, next it is amplified by antenna amp, and finally it is input to AV control unit. AV control unit outputs the sound signal to each speaker.

Satellite Radio Mode

• Satellite radio tuner is controlled by communication signal and request signal with AV control unit.
• Sound signal (satellite radio) is received by satellite antenna and transmitted to AV control unit. AV control unit is output the sound signal (satellite radio) to each speaker.

CD Mode

• CD function is built into AV control unit.
• AV control unit outputs the sound signal to each speaker when inserting the CD to AV control unit.

USB Connection Function

• iPod or music files in USB memory can be played.
• iPod sound signals are transmitted from USB connector to the AV control unit and to each speaker.
• iPod® is recharged when connected to USB connector.

  iPod® is a trademark of Apple inc., registered in the U.S. and other countries.

  NOTE: Use the enclosed USB harness when connecting iPod® to USB connector.