Operation Condition
Perform the power walk-in function when the following conditions are satisfied.
Forward Operation
FORWARD OPERATION CONDITION CHART
| Item | Request status |
|---|---|
| Driver side door | Open |
| Driver side seat belt | Not fastened |
| Power seat switch (sliding) | Not operated |
| Vehicle speed | 0 km/h |
| Seat position (sliding) | Other than front end |
| Seat back | Folded down |
Backward Operation
BACKWARD OPERATION CONDITION CHART
| Item | Request status |
|---|---|
| Initialize | Done |
| Driver side seat belt | Not fastened |
Switch inputs
|
Not operated |
| Vehicle speed | 0 km/h |
| Seat position (sliding) | The seat sliding position will not move after performing the forward operation. |
| Seat back | Folded up |