April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different variant/trim than selected.

CHECK HOOD SWITCH

Turn ignition switch OFF.
Disconnect hood switch connector.
Check continuity between hood switch terminals.

TERMINALS CONTINUITY REFERENCE CHART

Hood switch		Condition	Continuity
Terminal
1	2	Hood	Close the hood	Not existed
			Open the hood	Existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace hood lock (RH). Refer to "HOOD LOCK CONTROL : REMOVAL AND INSTALLATION ".