LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> G37 IPL, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Power Window Control System -- G37 Convertible) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement >> Check Anti-Pinch Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Anti-Pinch Function

WARNING: This page is about a different variant/trim than selected.
  1. Fully open the door window.
  2. Place a piece of wood near fully closed position.
  3. Close door glass completely with AUTO-UP.
    • Check that glass lowers for approximately 150 mm without pinching piece of wood and stops.
    • Check that glass does not rise when operating the power window main switch while lowering.
CAUTION:
  • Do not check with hands and other part of body because they may be pinched. Do not get pinched.
  • Check that AUTO-UP operates before inspection when system initialization is performed.
  • It may switch to fail-safe mode if open/close operation is performed continuously. Perform initial setting in that situation. Refer to "FAIL SAFE "
  • Perform initial setting when auto-up operation or anti-pinch function does not operate normally.
  • Finish initial setting. Otherwise, next operation cannot be done.
    1. Auto-up operation
    2. Anti-pinch function
    3. Automatic window adjusting function
    4. Retained power operation
scientia non olet · About LEMON Manuals