April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different variant/trim than selected.

CHECK PUSH-BUTTON IGNITION SWITCH

Turn ignition switch OFF.
Disconnect push-button ignition switch connector.
Check continuity between push-button ignition switch terminals.

TERMINALS CONTINUITY REFERENCE CHART

Push-button ignition switch		Condition		Continuity
Terminal		Condition		Continuity
1	4	Push-button ignition switch	Pressed	Existed
1	4	Push-button ignition switch	Not pressed	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace push-button ignition switch. Refer to "REMOVAL AND INSTALLATION ".