Freeze Frame Data (FFD) And IGN Counter
Freeze Frame Data
The BCM records the following condition at the moment a particular DTC is detected.
- Vehicle Speed
- Odo/Trip Meter
- Vehicle Condition (BCM detected condition)
CONSULT SCREEN TERMS DESCRIPTION CHART
| CONSULT screen terms | Description |
|---|---|
| SLEEP>LOCK | While turning BCM status from low power consumption mode to normal mode (Power supply position is "LOCK") |
| SLEEP>OFF | While turning BCM status from low power consumption mode to normal mode (Power supply position is "OFF".) |
| LOCK>ACC | While turning power supply position from "LOCK" to "ACC" |
| ACC>ON | While turning power supply position from "ACC" to "IGN" |
| RUN>ACC | While turning power supply position from "RUN" to "ACC" (Vehicle is stopping and selector lever is except P position.) |
| CRANK>RUN | While turning power supply position from "CRANKING" to "RUN" (From cranking up the engine to run it) |
| RUN>URGENT | While turning power supply position from "RUN" to "ACC" (Emergency stop operation) |
| ACC>OFF | While turning power supply position from "ACC" to "OFF" |
| OFF>LOCK | While turning power supply position from "OFF" to "LOCK" |
| OFF>ACC | While turning power supply position from "OFF" to "ACC" |
| ON>CRANK | While turning power supply position from "IGN" to "CRANKING" |
| OFF>SLEEP | While turning BCM status from normal mode (Power supply position is "OFF".) to low power consumption mode |
| LOCK>SLEEP | While turning BCM status from normal mode (Power supply position is "LOCK".) to low power consumption mode |
| LOCK | Power supply position is "LOCK" (Ignition switch OFF with steering is locked.) |
| OFF | Power supply position is "OFF" (Ignition switch OFF with steering is unlocked.) |
| ACC | Power supply position is "ACC" (Ignition switch ACC) |
| ON | Power supply position is "IGN" (Ignition switch ON with engine stopped) |
| ENGINE RUN | Power supply position is "RUN" (Ignition switch ON with engine running) |
| CRANKING | Power supply position is "CRANKING" (At engine cranking) |
IGN Counter
IGN counter indicates the number of times that ignition switch is turned ON after DTC is detected.
- The number is 0 when a malfunction is detected now.
- The number increases like 1 → 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON.
- The number is fixed to 39 until the self-diagnosis results are erased if it is over 39.