DTC Confirmation Procedure
- PERFORM DTC CONFIRMATION PROCEDURE
- Lock the steering.NOTE:STEERING REFERENCE CHART
To lock the steering - Set the selector lever in the P position.
- Turn the power supply position to the OFF position.
- Press any door switch.
To unlock the steering - Set the selector lever in the P position.
- Press the push-button ignition switch with brake pedal not depressed.
- Press the push-button ignition switch.
- Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT-III.
Is DTC detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END
- Lock the steering.