DTC Detection Logic
NOTE:
- If DTC B26F0 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to
"DTC LOGIC
".
- If DTC B26F0 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to
"DTC LOGIC
".
DTC DETECTION CONDITION CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| B26F0 |
STRG LCK RELAY ON |
BCM requests IPDM E/R to turn steering lock relay OFF, but BCM cannot receive steering lock relay OFF state signal from IPDM E/R (CAN) within 2 seconds. |
- Harness or connectors (The CAN communication line is open or shorted.)
- Harness or connector (Steering lock unit circuit is open or shorted.)
- Steering lock unit
- IPDM E/R
|