Active Test

TEST ITEM DESCRIPTION CHART

Test item	Description
BATTERY SAVER	This test is able to check interior room lamp operation On: Operate Off: Non-operation
OUTSIDE BUZZER	This test is able to check Intelligent Key warning buzzer operation On: Operate Off: Non-operation
INSIDE BUZZER	This test is able to check warning chime in combination meter operation Take Out: Take away warning chime sounds when CONSULT-III screen is touched Key: Key warning chime sounds when CONSULT-III screen is touched Knob: OFF position warning chime sounds when CONSULT-III screen is touched Off: Non-operation
INDICATOR	This test is able to check warning lamp operation KEY ON: "KEY" Warning lamp illuminates when CONSULT-III screen is touched KEY IND: "KEY" Warning lamp blinks when CONSULT-III screen is touched Off: Non-operation
INT LAMP	This test is able to check interior room lamp operation On: Operate Off: Non-operation
LCD	This test is able to check meter display information Engine start information displays when "BP N" on CONSULT-III screen is touched Engine start information displays when "BP I" on CONSULT-III screen is touched Key ID warning displays when "ID NG" on CONSULT-III screen is touched Steering lock information displays when "ROTAT" on CONSULT-III screen is touched P position warning displays when "SFT P" on CONSULT-III screen is touched INSRT: This item is displayed, but cannot be monitored BATT: This item is displayed, but cannot be monitored Take away through window warning displays when "NO KY" on CONSULT-III screen is touched Take away warning display when "OUTKEY" on CONSULT-III screen is touched OFF position warning display when "LK WN" on CONSULT-III screen is touched
FLASHER	This test is able to check hazard warning lamp operation The hazard warning lamps are activated after "LH/RH/Off" on CONSULT-III screen is touched
P RANGE	This test is able to check AT shift selector power supply On: Operate Off: Non-operation
ENGINE SW ILLUMI	This test is able to check push-ignition switch illumination operation Push-ignition switch illumination illuminates when "ON" on CONSULT-III screen is touched
LOCK INDICATOR	This test is able to check LOCK indicator (push-button ignition switch) operation On: Operate Off: Non-operation
ACC INDICATOR	This test is able to check ACC indicator (push-button ignition switch) operation On: Operate Off: Non-operation
IGNITION ON IND	This test is able to check ON indicator (push-button ignition switch) operation On: Operate Off: Non-operation
HORN	This test is able to check horn operation On: Operate Off: Non-operation
TRUNK/BACK DOOR	This test is able to check trunk lid open operation Open: Operate
INTELLIGENT KEY LINK	This test is able to check Intelligent Key interlock function ID No1: BCM transmits Intelligent Key ID No1 to each control unit ID No2: BCM transmits Intelligent Key ID No2 to each control unit
INTELLIGENT KEY LINK (CAN)	This test is able to check Intelligent Key interlock function Off: Non-operation ID No1: BCM transmits Intelligent Key ID No1 to each control unit via CAN communication line ID No2: BCM transmits Intelligent Key ID No2 to each control unit via CAN communication line ID No3: BCM transmits Intelligent Key ID No3 to each control unit via CAN communication line ID No4: BCM transmits Intelligent Key ID No4 to each control unit via CAN communication line ID No5: This item is displayed, but cannot be used