LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2011 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 159 (Security Control System) >> Removal And Installation >> Remote Keyless Entry Receiver >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front pillar upper finisher (RH). Refer to "COMPONENT ".
  2. Remove the side ventilator grille (RH). Refer to "EXPLODED VIEW ".
  3. Remove the instrument side finisher (RH). Refer to "EXPLODED VIEW ".
  4. Remove the upper glove box. Refer to "EXPLODED VIEW ".
  5. Remove the bolt (A), disconnect the harness connector (1) from the remote keyless entry receiver (2) and remove.
    Fig 1: Identifying Remote Keyless Entry Receiver, Harness Connector And Mounting Bolt
    G05930015Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals