Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation. Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: WORK PROCEDURE ".

Disconnect the battery negative terminal. Refer to "REMOVAL AND INSTALLATION ".
Remove the instrument lower panel LH. Refer to "EXPLODED VIEW ".
Remove the BCM screws and release the BCM.
Disconnect the harness connectors from BCM and remove.

Fig 1: Identifying Data Link Connector, BCM, Steering Column And Screws
Courtesy of NISSAN NORTH AMERICA, INC.